Mini Jack-o-Lanterns

If you waited til the last minute to get your Halloween pumpkin this year, you may think you don't have time to really decorate anything anyway. Not true! These mini pumpkin Jack-o-Lanterns are super quick and easy to whip up, you can have a whole army of them by Halloween night!

To make these easy mini Jack-o-Lanterns at home you will need:

One small pumpkin
one pair of plastic Dracula teeth (I found mine in a pack of 8 at Target in the dollar section. BONUS: they glow in the dark).
Carving tools
paint or marker

To start, measure your Dracula teeth to see how large of a hole you need to make in your tiny pumpkin to fit them inside. Decide where you want the mouth to be on your pumpkin, and then carefully carve out a space to insert the teeth. I have some linoleum block cutting tools from college, and I think they do a really good job of carving pumpkins, but you do need to be careful as they are sharp and can slip if you aren't paying attention.

Once your mouth hole is carved, you can remove any of the insides of the pumpkin you feel necessary and then insert the teeth. It actually looks pretty creepy just like this, stop here if you want!

Finish your Jack-o-Lantern by adding eyes, etc. with paint or permanent markers. Presto! A tiny Jack-O-Lantern complete with glowing teeth!

Tottie the Pug Mask

After the media whirlwind of Tottie's Halloween costume, I joked to my coworkers that I was going to be Tottie for Halloween. After thinking about it a little bit, I decided that it actually wasn't a half bad idea! I used some felt to create this Tottie the pug mask! You can download a free .pdf pattern for the mask here.

To create your own Tottie the Pug mask for Halloween, or a dress up accessory for the kiddies, you will need:

Scissors
fabric glue (you can also hand sew the pieces if you prefer
felt in at least 3 colors (I chose an oatmeal color, dark brown and black)
piece of elastic (you could substitute string to tie it on, but elastic is preferred)
the printed out pattern pieces

Start by printing out your pattern and cutting out all of the pieces carefully. Next, trace each piece onto the appropriate colored felt and cut them out (or pin the paper pieces directly to the felt and cut around them). I wanted my pug to look as much like Tottie as possible so I used the oatmeal color for the main face cutout, the black for her nose, and the dark brown for all of the other pieces. If you want to make a pug that is special to you, pick out felt colors that resemble your own pug!

After your pieces are cut out, arrange them onto the main face portion of the mask. Once you are satisfied with the placement, use fabric glue to glue them in place (or sew them on if you prefer). Last, attach your elastic band (one end attached to each side of the mask). I usually hold my mask up to my face (or the face of whoever will be wearing the mask) and see where the elastic will best match up with their ears so I know where to attack my elastic so it will be comfortable. I also trim my elastic so it doesn't require tons of stretching to fit around my head, if it stretches too much it will wear out quickly and the elastic will need to be replaced well before your mask has been worn out.

A few tips: If you are making a mask you intend to keep a longer period of time, you may want to cut out 2 pieces of the mask base (main face) portion of the mask and sew them together with a tiny bit of stuffing. This will give your mask a sturdier base to attach your other pieces to. Sewing your pieces together rather than using glue will also make a more permanent attachment that is longer lasting (and using a blanket stitch along edges can smooth them out and make them look neater if your cutting left something to be desired).

Enjoy your new pug mask!

Peanut Butter Dog Treats

I'm making a package of goodies to send to my cousins in celebration of their dog, Tottie's, new found viral internet fame. How could that package be complete without some treats for Tottie herself (and her furry siblings)? This is a quick easy recipe for some dog treats you can make for the pups in your life! There are no preservatives, and you can substitute ingredients based on your dog's dietary needs.

To make these treats at home you will need (makes 30-40 treats):

2 cups whole wheat flour*
1/2 cup old fashioned rolled oats*
2 tsp cinnamon (optional)
3/4 cup water
3/4 cup peanut butter

*If your dog is on a grain free diet, you may omit the rolled oats and substitute coconut flour, or a mixture of grain free flours. You could also add carob chips to these if you feel like spoiling your pup (dogs should never, ever eat chocolate).

Start by whisking together your dry ingredients in a bowl to evenly combine them. Next, I put my peanut butter and water together in a microwave safe bowl and microwave for about 1 minute (two 30 second intervals) and stir them together into a melted mixture (this makes stirring the peanut butter into the dough much easier).

Add the wet ingredients into the dry and stir together to form the dough. You may need to add a bit more water if your dough is too dry (I add an extra teaspoon at a time). Once the wet mixture is mostly incorporated, I usually start kneading the dough with my hands to bring it together. You will end up with a dough that is very dense, and resembles a bread dough more than a cookie dough.

Pinch off small pieces of the dough and roll them into balls with your hands. Place onto a parchment lined cookie sheet, about one inch apart and flatten with a fork. Bake at 325 degrees F for about 15 minutes, then turn off the oven and allow to cool inside the oven (this will aid in keeping the treats from gaining moisture while they cool and you will end up with nice crispy crunchy dog treats).

These treats will keep in an air tight container at room temperature for up to 4 weeks. To elongate the shelf life, you can keep a few treats at room temp and put the rest in the freezer (in an air tight container) for up to 6 months- just allow the treats to thaw about 20 minutes before giving them to your dog.

You can change these up in lots of ways, substitute low sodium chicken broth or sugar free applesauce for the water (you could also add a thumbprint and give these to your dog with a little sugar free jam or preserves in the center for a special treat!

Package some up for the furry friends in your neighborhood for Halloween!

Wrecking Ball Dog Costume

I have bragged about my pretty awesome cousins in the past, and they have impressed me with their cleverness yet again. McKenna made this "Wrecking Ball" costume for her pug, Tottie, for Halloween and I just had to share it with you all. I'm not a Miley Cyrus fan by any means, but talk about hilarious!

I love my cousins!

To make this costume you will need to measure your own pet to get exact measurements. Supplies used were:

an old Barbie doll
polyester fiberfil
1/2-1 yard dark grey fabric (depending on dog size)
scissors
needle and thread
Length of chain
A dog that is fine and dandy with wearing awesome costumes

A lot of trial and error went into this, but you start by cutting out two circles from the grey fabric to serve as the main wrecking ball shape. Cut leg holes based on your dog's dimensions, and leave holes for the head (and tail if necessary depending on your dog breed).

You will sew your circles together (as show above, leaving a large hole for your pups head. Tottie is kinda into wearing costumes, so she actually climbs in the neck hole. If your pet is not so into the dress up, you may want to cut the bottom circle open and add a velcro closure. Attach your chain to the center of the top fabric circle. You will add your Barbie to the chain after cutting her hair and dolling up her makeup. McKenna used red nail polish to paint on bright red lipstick.

As you can see above, the chain was sewn onto the wrecking ball with several overlapping stitches (you could also use a chain leash attached to a harness if your pet needs a better leash option--you would make a small hole in the top of your wrecking ball and pass the chain leash through). When attaching your Barbie to the chain, you can use some thin wire or twist ties if necessary.

This baby is stuffed up with plenty of fiberfil to make a nice stiff round ball shape. Don't skimp on this! See that silly grin on Tottie's face? She loves her new Halloween costume :)

Note: Take care to watch your pets when in costumes, do not allow them to ingest any kind of fiberfil. Pets should not be in costume for long periods of time to prevent any overheating. Be responsible.

I don't know about you, but I want to be Tottie for Halloween. Learn how to make your own Tottie the Pug mask here.

Glow in the Dark Halloween Mug

I've been playing around with some glow in the dark acrylic paint and while wandering the aisles at a local Dollar Store I found a plain mug and knew it needed some glow in the dark flair! I decided to paint a face on it for Halloween, it looks quite a bit like Jack Skellington from Nightmare Before Christmas and I am just fine with that. I'm especially fine with the overall cost of this project (with coupons I spent about 4 dollars for all the supplies, and additional mugs would only cost an extra dollar each as there was plenty of paint left over.

To make your own glowing Halloween mug you will need:

1 plain mug in color of your choice
DecoArt Glow-in-the-Dark Paint
paintbrush
Extra acrylic paint colors of your choice for mixing (optional)


Start by making sure your mug is clean and dry. Next, mix your acrylic paint. I like the DecoArt glow in the dark paint because you can mix it with other colors in a 1:1 ratio. I wanted a really vibrant glow here, but decided to add in some glittery acrylic paint in gold for this mug. I've tried mixing in other solid colors and it still works, but dulls the glow a little. These glitter paints mix without dulling the glow in the dark paint, and they came in this sample pack for a dollar, great because I didn't need a lot of extra paints but it gives lots of color mixing options.

Next, I painted on my eyes. I did this first because I wanted to base the rest of my face on the size and distance of the eyes. After painting them on to my liking, I put in the nose holes and then the crooked grin.

I put on quite a bit of paint, so to aid in drying evenly I carefully laid the cup on its back, so the face I painted was pointed at the ceiling. If I hadn't done that the paint would have eventually pooled at the bottom of the eyes and possibly ran down the side of my mug. Another option would be to flip the cup every so often while drying so that it rests on the lip and then base of the mug.

*Note: While this paint works great on glass surfaces, I recommend hand washing to give your mug the longest life. I also recommend letting the paint sit out to dry for at least a week before you use and wash it at all.

Don't forget to follow The Craftinomicon on your favorite social media so you don't miss any other great projects!

Ghostly Cupcake Toppers: 2 Ways

Halloween is quickly approaching and soon there will be all kinds of sweets that could use some spooky touches to get in the spirit. Here are 2 ways to make easy cupcake toppers and add a little Halloween spirit to a party!

Topper number one:

For this cupcake topper you will need:

Toothpicks
paper or cardstock of your choice
scissors
pencil
non toxic glue
glow in the dark paint (optional)
small paint brush (optional)
ghost pattern (you can also draw ghosts free hand)

Start by drawing or tracing your ghost shapes onto your paper or cardstock. You will need 2 cutouts for each cupcake topper (a front and a back). Cut out all of your shapes and then sandwich your front and back pieces around a toothpick, glue together and allow to dry completely. If you like, add a spooky face with glow in the dark acrylic paint (you could also cut out the eye and mouth shapes with a mat knife or hole punch). Add these little guys to cakes, cupcakes, etc. for a little extra spooky decoration.

Topper number two:

For this topper you will need:

one package of small suckers (I used Dum Dums)
small squares of tissue paper (I used white, silver and gold)
scissors
string

Cut out squares of tissue paper to layer together for your ghosts. I like using the silver and gold as an underlay for white, but you can use any color you like. Place the sucker in the center of your tissue paper squares and tie them around your suckers with string. The sucker will be the ghosts head, and the stick can be placed directly into your cupcakes. You can add faces if you like, but they look cute without them as well. Not making any kind of cakes? This is a great way to dress up your Halloween candy to make it a little more festive for the Trick-or-Treaters.

How do you like to dress up your Halloween treats?

If spooky snacks aren't your thing, you can also check out this fast and easy tutorial for gravestone garden markers, and don't forget to follow The Craftinomicon on your favorite social media sites so you don't miss any upcoming projects.