Paper Gerbera Daisies

My favorite flower is probably a gerbera daisy. I love the bright colors they come in, they seem to last quite a long time in a vase compared to other varieties, and something about them is just plain fun. I have been working on a pattern to make some out of paper for quite awhile, and came close to finishing it up for a Craft Wars challenge, but decided to hold off and work on it a tiny bit more to make sure it was just right. Here are my results, let me know what you think!

To make your own paper daisies you will need:

Paper of choice (I used a magazine)
Scissors
Daisy Petal Template
wire stem
glue
Decorative button
floral tape (optional)




I started by making a template for my petals. Since cutting these out gets rather time consuming (or maybe it's just the fact I always cut these out while doing something else like watching a movie?) I opted to go with only 3 different sizes of petals, cutting 2 of each size to make one flower. You could certainly play with the size on your computer/printer to get more like 5 or 6 different sizes of petal templates and use smaller petals in place of a button center, as I used.



I've never seen a flat daisy, so I used my scissors to gently curl each petal a little before gluing my edge tab under. As this daisy is made with magazine paper, not much pressure is needed, and you want to be careful not to tear your petals, as they did just take you awhile to cut out. I will mention, these work pretty great with vellum papers -- I'll get photos of the one I attempted and post it later on, but the fact that these only make a slight cone shape in the center once assembled makes them work well with thicker papers as well as thin.





I found these great flower shaped buttons and decided they'd look great with my flowers. You could use just about any button you like, or if you don't like the button look, attach your button to your floral wire stem, then cover it with a little batting and wrap it in your favorite fabric or some tissue paper.



Then start adding your petals on (you will need to poke a small hole in the center of each one before putting it on the wire), arrange them as you like (you may need to add a little glue between each layer of petals to help them stay in place) and wrap the stem in floral tape if you want. I always wrap mine with tape as I think it look nicer, but it is not necessary.

If you want to check out more handmade crafts and recipes, visit this link party at Frugal By Choice, Cheap By Necessity.

Styled Mag

The new issue of Styled mag is out! If you have never seen this great online magazine before, I took the liberty of embedding this issue for you all to enjoy. They do amazing work as far as layout and design of the magazine, not to mention great content throughout. I highly recommend checking out previous issues, all are available online for you to flip through at your leisure!

Open publication - Free publishing - More party

DIY: Small Gift Bows

Here is another great gift bow tutorial! These are a little bit easier to make than my Jumbo Gift Bows due to the smaller, more manageable size. They are also a great option because you can use almost any paper to make them! All of the bows you see here were made from pages out of a magazine. Holiday ads have great colors and images to make gift bows from. You could also use scrap booking paper, newspaper, gift wrap, or even get some rolls of ribbon at the fabric store and use it to make these decorative bows without having to cut strips yourself!

To make the bow seen at the top of the page you will need to start by selecting a full page out of a magazine and cutting it into strips:

For this bow I cut my page into 7 strips, all 3/4" wide as seen above. The first 3 are the entire length of the page. The second 3 have each had 1.5" removed, and the shortest strip is 4.5" long.


Next, you will make your loops into figure 8 shapes by looping your paper. Take one end and loop it in towards the middle like so:

You will notice that you want to loop it so that the "wrong side" of your paper is facing up on both the center of your bow, as well as the end you looped towards the middle. Loop the other end towards the middle as well, and you will end up with a finished loop of your bow that looks like this:

Secure your bow loops in the center with glue, double sided tape or a staple. You will make your 6 largest strips into the figure 8 loops as shown above, and the smallest strip will be made into a regular, circular loop. Once all of your loops are made you will have this:

Now your bow is ready to assemble! Take your 3 largest loops and arrange them to make the bottom of your bow. You can stick them together however you like, I chose to use glue. The type of glue you choose will depend on your material. I found this adhesive chart on Pinterest that is helpful if you aren't sure what type of glue works with your materials. Once you glue these 3 loops together you will have this:

Arrange and assemble your 3 other figure 8 loops in the same way and then glue them together. This will then be glued to the center of the bottom of your bow. Glue your circular loop down in the center to finish your bow!

Here is one I made out of some holiday cookie images from a cooking magazine (who doesn't want their present wrapped in chocolate macarons and cherry pistachio nougat?):

Here is another bow I made from magazines as well, it doesn't have a full tutorial, but is very similar to the jumbo gift bow. It is made from 1/2" strips: 5 of the bottom, 4 in the second layer and 2 circular loops to finish the center (lengths are the same as above for each layer).

DIY Gift Card Envelopes

Hey everyone! I have been taking a bit of a mental health break this week (off at both jobs!) but I decided to share a quick and easy craft with you today because I just can't stay away! These are cute little office style envelopes for gift cards. There is a template available at the bottom of the post, feel free to grab it and manipulate it to any size you want in your favorite image program. While I make these to wrap up gift cards, they would also be great to make a little larger and gift recipe cards to your friends any time of year. If you have a lot of gift cards you send out at the holidays, now is a perfect time to get started on a little stash to have on hand as well. When making your template, I recommend printing it out on card stock as it is easier to trace around and will last longer than printing on regular paper. Also, the gift card envelopes I made are 2.25 inches x 3.5 inches final size. One of these days I will learn how to upload pdf files so you get things the right size to start, I swear! However, these envelopes are great for not only gift cards, but regular cards, thank you's and, as previously mentioned, wrapping up tasty recipe cards as well, so you will likely want to adapt it to any size you want.

To make your own gift card envelopes you will need:

Scrap book paper in your favorite patterns (one 12"x12" sheet will yield you 4 envelopes)
Embroidery Floss in your favorite colors
Needle
Scissors
Xacto Knife
Pack of small buttons, various colors
Glue (any glue will work for this, so use what you have on hand or just buy a cheap all purpose glue. I generally spread mine thin with a paint brush, so a cheap one of those helps too but is not necessary)
Ruler

If you don't want to buy paper, I would recommend using magazines or store catalogs. These often have at least some pages that are thicker, but if you like the images on the very thin magazine paper, I suggest using a piece of tape on the backside or your envelope where you will be sewing your button into place to help avoid tearing your paper (you could also glue multiple sheets together but that makes this project much more complicated than it needs to be). The magazine paper is an extra cute idea if you make your envelope go with your gift card: card to Pottery Barn? Make it out of one of their ads or a page from their catalog, etc.

Once you have your paper cut out in the size you want, I generally use my Xacto knife to score my folds (very gently, I really don't even push, just drag the blade gently across the paper). I score the "pretty side" of my paper, not the back. A ruler helps to keep your lines straight, if you don't trust yourself scoring the paper, you can also line up your ruler and fold against it to keep your folds crisp.

Then, I select my buttons (I generally use matching buttons on each envelope, but it is not necessary) and my embroidery floss. Sew your button into place as marked on the pattern. If you have small grommets, you can use card stock circles and grommet them into place, but again, not necessary. I try to buy special equipment as rarely as possible. When sewing your button onto the top flap you will want to sew it securely, tie it off and then rather than clip your remaining thread, sew back through to the outside of your envelope and tie a knot around the base of your button, then leave the remaining string so you can fasten your envelope shut.

Once you have your buttons attached, you will need to glue your two side flaps together. To do this, I use a small paint brush to apply a very thin layer of glue onto the back side of the shorter flap (the one with the button sewn onto it). I then fold the envelope closed, long flap down, shorter flap on top to secure them. Be sure not to use too much glue as you don't want it seeping out and sticking your envelope closed to the point it is unusable. Then, with a small amount of glue, close the bottom flap over the two side flaps. You will use the buttons and string to close your final envelope (yes, it is reusable!).

I hope you all enjoyed this tutorial and have fun making these little envelopes yourselves! If you have any questions, let me know, as this all makes sense to me I would love any feedback on steps I could make clearer or if more images are needed to illustrate the process. :D

Happy Crafting!

Paper Twine

So, I stumbled on this tutorial the other day and felt inspired. I don't happen to have a spindle, or any yarn making experience but I thought I might want to try making some decorative twine out of an old magazine I had sitting around. What you see here is the result.

I made a little card to wrap my twine around out of a cereal box. You really do need something to wrap around as you go, or the paper has trouble holding together. I think this would be great to wrap around a gift instead of ribbon, and is a nice way to re-use an item many of us read through once and then get rid of (though truth be told, I'm horrible about keeping magazines around forever).

I'm going to try to come up with a few other things to do with old magazines and newspapers, maybe even some paper mache projects are going to happen. I've seen some pretty great paper mache going on in the craft world lately.

Do you have any great projects using newspapers and magazines? I'm currently trying to make some beads, details to come.